Author: BenitoSanduchi, published on 2012-03-25
I thought there should be a lamp to go along with all the 60’s furniture. Modeled after a lamp that we own (see pics). Scale is about 1:10.
I uploaded the .c4d file too, in case there are any other Cinema 4D modelers out there that want to customize their lamp more easily.
Print gently. You may have to drill out the holes in the shade and the base a little bit to fit the tubing in depending how well your printer is calibrated. I used a piece of 5/32″ brass tubing and the holes are about 4mm in the stl.
I really wanted to get a little USB powered LED in here so I left a tiny tiny channel up the middle of the lamp. Don’t have time to take it further right now, but if the whole thing was scaled up a little it would be pretty easy.
License: Creative Commons – Attribution
Tags: 1960s, 60s, lamp, madiverse