B9 Environmental Control Robot (Lost in Space)

Author: cerberus333, published on 2013-09-29

Click this button to get the 3D model

Summary

robot from lost in space (LIS).
Ok,,, Long story here.
At Maker Faire NY I met Mike Joyce who makes the B9 creator
resin 3D printer. When he saw my display He asked why i had not
made the robot from lost in space. I made a unflattering remark
about the b9robot from LIS. Mike informed me he is the
distributor/builder of the only full sized licensed b9 robot.
So,, I had to make a b9 robot (as my way of apologizing) intended for resin printing.
hopefully this is a adequate model.

second version b9robot3PE3R.stl has the shoulder loops,
power pack and a different knob on the torso, somewhat closer
to the original.

Instructions

intended for resin printer, not sure FDM/FFF will do well
with the finer details (antenna) and overhangs

second version b9robot3PE3R.stl has the shoulder loops,
power pack and a different knob on the torso, somewhat closer
to the original.

License: Creative Commons – Attribution – Non-Commercial

Tags: b9, b9_robot, Lost_in_space