Author: Technomupet67, published on 2013-09-22
Printed on Replicator 2X using glow in the dark ABS Filament.
Printed 100% fill / 2 Shells / 0.2 Layer
Pause the print at approx 70% completion and put a Euro 5 cents coin in the slot. Resume the print and Voila !
There is one with a Text extruded and one with no text. Simply import the STL in Openscad to add text.
This is a Remix from http://www.thingiverse.com/thing:11025
but I wanted to be able to make my own modifications and did not like the fillet on the sides. Also want to change the coin size and thickness.
License: Creative Commons – Attribution