DERRINGER 357 COP

2017-02-10 admin 0

Author: GARUSTE – DERRINGER 357 COP PRINTABLE
my old project https://grabcad.com/library/derringer-357-cop-3
Print Settings
Printer: SHAREBOT
Rafts: Doesn’t Matter
Supports: Yes
Resolution: MEDIUM
Inf…

Martian rover

2017-02-10 admin 0

Author: repbaza – Then I plan to install FPV system and make robotic arm I want to experience it on the street, but it is winter … All around snow. Russia..))
there are only 19 pieces))) is not diff…

Kame: 8DOF small quadruped robot

2017-02-10 admin 0

Author: bqLabs – Kame is a little quadruped robot based on an ESP8266 WiFi module. It has 8 servos (two per leg) and a small LiPo battery.
It can be programmed with Arduino. For more information, full…

The Ultimate box maker

2017-02-10 admin 0

Author: Heartman –
The file include now the Panel Maker. Check below in the Experimental area to download it. My first try with OpenScad, the box is fully customizable. I hope you will enjoy with it,…

rBot – fully 3D printed CNC

2017-02-10 admin 0

Author: reitter_m – More videos and instructions and end effectors will follow soon. https://rbotcnc.wordpress.com
Bill of materials is now available!
Min. build volume needed: 15cm x 15cm x 15 cm Eve…

Can Handle

2017-02-10 admin 0

Author: Tony_G – I liked the can holder put up by “ilmandorlone”, but found it too short for the common12oz cans around here (Maryland). So I remade it a bit taller, for a can that is 4.815in [122.3mm…

FPV RACER 190mm (beta)

2017-02-10 admin 0

Author: Florentf31 – This quad is based on the sigan 180 quad.
The final object will not have the same solidity as the original frame from http://sigandrone.com/
Video : https://www.youtube.com/watch?…

Motorized Star Wars AT-AT

2017-02-10 admin 0

Author: LtDan – This is a walking model of an AT-AT from the Star Wars films. It is powered by a 9V battery, a 90 rpm motor, and a switch. Everything else is 3d printed using roughly 750 grams of fila…

1 2 3 27