Support for Dremel 4000

2017-02-10 admin 0

Author: bqLabs – Support to fix a Dremel 4000 to your table and use it free handed.
For Dremel 200: http://www.thingiverse.com/thing:1296900 Author: http://www.soniaverdu.es/
Print Settings
Printer: B…

Micrometer Set Inch/Metric

2017-02-10 admin 0

Author: LtDan – Inch and metric versions of a two piece printable micrometer. The Inch micrometer has a travel length of 2.5 inches and the metric has a travel length of 30 mm. I have included an addi…

Solder Cableholder

2017-02-10 admin 0

Author: Landin81 – When you want to solder two cables together and dont have four arms to both solder and hold the cables.
All kind of cables fit into the different slots.
A “helping hand” can damage …

vise

2017-02-10 admin 0

Author: joestraws – main body is in four parts, glued together.
parts will need to be scaled up and aligned to the print bed surface. the main screw, handle and caps required a brim for support. 3x .2…

Corner Clamp (One Inch)

2017-02-10 admin 0

Author: flemish4 – 1″ corner clamp for holding two 1×2 pieces of wood together for drilling and screwing when making frames.
Uses 8mm hex bolt with a captive nut glued in the middle.
Print with a high…

Drill bit sharpener

2017-02-09 admin 0

Author: mgx – I’ve researched many existing approaches to drill bit sharpening but did not find one that I like. I like simple and utilitarian designs. This is one of those: a one-piece guide for shar…

Lock Pick Set Card

2017-02-09 admin 0

Author: Lockheart – The idea for a lock-pick set that you could carry around in your wallet came to me when I began to learn how to pick locks this summer for fun. It was partly inspired by the veloci…

Mini 3D printed Lathe

2017-02-09 admin 0

Author: Branez – I’m doing a little lathe for plastics. This is a work in progress and I will publish files and images when it is completed.
Hey! This thing is still a Work in Progress. Files, instruc…

1 2 3 8