Destiny Ghost Fully Detailed Model, LED Illuminated, Fully printable without supports!

Author: BoldPrintShop, published on 2014-11-03

Click this button to get the 3D model

Summary

Make your own fully detailed model of Destiny’s Ghost companion!
Fully printable without supports. More details on printing under the Instructions Tab.
I like having it assembled with magnets, but I understand some people may want it 100% printable. If there is enough interest I will alter the model to fully snap together without magnets.
Link to LED Light: http://www.ebay.com/itm/171239692713?_trksid=p2059210.m2749.l2649&var=470455566681&ssPageName=STRK%3AMEBIDX%3AIT
Link to Magnets:
http://www.homedepot.com/p/Magcraft-Rare-Earth-1-4-in-x-1-16-in-Disc-Magnet-80-Pack-NSN0657/204721317

http://www.amazon.com/Pcs-Neodymium-NdFeB-Disc-Magnets/dp/B011SY1NNO/ref=sr_1_6?ie=UTF8&qid=1437485649&sr=8-6&keywords=1+4+x+1+16+neodymium+magnets

https://www.kjmagnetics.com/proddetail.asp?prod=D41

Now Print a Display Stand!! Thanks to this fellow thingiverse user
http://www.thingiverse.com/thing:1169173

Instructions

There are 5 files for this model, detailed below:
PRINT INSTRUCTIONS
………………………………………………………………………………………..
Black_Pieces.STL -Suggested Settings: Black PLA, 225C, 15% fill, 2 shell, 0.12mm layer height, Raft Optional. NO SUPPORTS
Wing_Set.STL – Print two of these to make one model. White PLA, 225
C, 15% Infill, 2 Shell, 0.12mm layer height, No raft, No supports.
Diffuser_Ghost.STL – Transparent Blue or Aqua filament, 225*C, 15″ Infill, 2 Shell, 0.20mm Layer, no raft, no supports.
Pins.STL – Any color, 0.2mm layer height, 2 shell.
Tips.STL – Orange PLA, 2 shell, 15% infill, 0.12mm Layer Height. No raft, No supports.
…………………………………………………………………………………………..
Winglets have built-in rafts to aid in keeping the corners stuck down. Trim these off afterwards with a deburring tool or razor blade.
Use good super glue or 2-part epoxy to glue the Neodymium magnets to the body and the inside of the wings. Pay very close attention to the orientation of the magnets so that the correct sides attract each other, double check this before gluing
“Tips” should press fit into the top of the wings.
The black side wing inserts should slide onto the side wings and sort of click into place, glue shouldn’t be necessary.
Glue diffuser and black eye-cover onto front of the body. They should fit snug.
Use pins to allign the two halves of the main body. Apply a drop of glue to the holes first to permanently attach them.

License: Creative Commons – Attribution – Non-Commercial

Tags: assembly, bungie_destiny, cosplay, destiny, destiny_game, Destiny_Ghost, display, ghost, led, makerbot, playstation, playstation3, playstation4, playstation_3, playstation_4, Printer_test, prop, ps3, ps4, xbox, xboxone, xbox_360, xbox_one