Author: ymmij, published on 2013-08-19
Using the ‘back cap’ designed by ComradeQuiche (http://www.thingiverse.com/ComradeQuiche/), I’ve came up with an adaptor to fit the Diana Lens on the Lomography’s Konstruktor camera.
The Konstruktor’s aperture was designed on the camera body (further from the lens), therefore the strong vignettes on the film plane. I have not tested it on actual film or with other diana lens (eg. fisheye lens, wide angle etc).
Tags: 3d_printer, 8storeytree, adaptor, camera, diana, dianaf, diana_lens, konstruktor, lens, lomo, lomography, makerbot, thirtysix, thirtysixcreates