DJI Style 450 Arm Fully Flat – Easy to print

Author: mavacpjm71, published on 2013-11-10

Click this button to get the 3D model

Summary

Modified design of another contributor to allow for 100% flat top side, makes it easier to print without need for rafting or supports. Enjoy.

Credit to Pintokitkat for Original Design, I will be making more updates to this original, as legs are staple to have on hand for our Quads.

Instructions

Print at 45 % infill and .20mm layer height and 3 Shells for a good solid arm. Can increase infill if you want more strength. Standard Print mode on Replicator 2 or 2x.

License: Creative Commons – Attribution – Share Alike