fold-away drill handle

Author: Jooxoe3i, published on 2013-11-15

Click this button to get the 3D model

Summary

a foldable handle for a <5mm drill (that can be printed in place)

usefull to deburr or widen holes on printed parts that have to fit a screw/rod/… later on

(was designed/fitted around a 85mm long 4.8mm drill)

Instructions

can be fitted with a M3 nut and screw to hold the drill
or use pressfitting – for that you might want to adjust the hole for the drill

License: GNU – GPL