Hammer Mini H Quad v3.0 – Converted to 3D

Author: PaulHam, published on 2014-03-24

Click this button to get the 3D model

Summary

While looking for Mini H Quad frames for me and my Dad, I came across a website called http://untestedprototype.com/ who have 9 sets of plans all in DXF format for being mill on a CNC.

I do not have a CNC mill but I do have a 3D printer so I decided that i wanted to try the Hammer Mini H Quad v3.0 frame first.

I have converted the DXF files into STL files using Rhino3D. Thickness of parts have been assumed but not tested yet!
I am very new to 3D modeling and printing so things may not be correct all the time, advice is appreciated.

Feel free to print these on your own printer and leave a comment on changes that should be made.

v3.1 Changes – 24/04/20134

  • Thinner Mobius plate
  • Spacer added onto the arms
  • MainTop has holes for larger flight controllers
  • Holes for hex posts moved to accommodate larger FC

Additions
Different arms have been added, they have cutout for the motor wires to pass and a spacer.

  • ArmLighter.stl
  • Arm_Lighter_Spacer.stl

Instructions

Required
=
4 X Arms
1 X MainBot
1 X MainTop
1 X Top
1 X Mobius
2 X Landing

  • nuts,bolts spacers ect

Motors: RCX 1804 (2400KV) Micro Outrunner Brushless Motor (Clockwise & Anti-Clockwise)
Propeller: 5×3 2 Blade
ESC: Afro ESC 12Amp Multi-rotor Motor Speed Controller (SimonK Firmware)
Flight Controller: AIOP V1.1 ALL IN ONE PRO Flight Controller
Receiver: FrSky V8R7-II 2.4Ghz 7CH Receiver

The build manual from untestedprototype.com should be used for the acual assembling of the frame (remember that the thicknesses will be different)
http://untestedprototype.com/2014/03/hammer-mini-h-quad-v3-0-manual/

I am currently printing the parts in PLA @ 80% infill

License: Creative Commons – Attribution – Share Alike

Tags: H-Quad, Hammer_Mini, Hammer_Mini_H_Quad, H_Quad, Multirotor, Quad, Quadcopter, RC