Keyless Entry Button Jeep

Author: T311, published on 2013-11-22

Click this button to get the 3D model

Summary

This is a keyless entry button for a Jeep Grand Cherokee. I printed it using PLA on the outer most layers (2 layers) then changed the filament to flex PLA for the rest of the button insert. I used a replicator 2 with following parameters: 40% infill, 2 shells, and .15 mm layer height.

License: Creative Commons – Attribution – Share Alike

Tags: button, car, Flex, Flexible, Jeep, Key, Keyless, Keyless_entry, ninjaflex, SUV, truck