Kossel 250 V-Slot 3D Printer – DIY Kit

Author: UltiBots, published on 2014-09-08

Click this button to get the 3D model


Kossel 250 V-Slot 3D Printer – DIY Kit

Nothing quite captures the imagination like a Delta style 3D printer in action. The UltiBots Kossel 250 V-Slot is a fun kit to assemble and print from. It has a 250mm heated bed with an aluminum heat spreader and Kapton Heater. This kit uses a PG35L geared motor directly mounted to the effector. Our Micro Extruder is compact, lightweight, and proven. It is unlike Bowden Tube style exctruders because the filament is fed directly into the HotEnds J-Head. Together with V-Slot extrusion and wheels this kit is straight forward and less complicated to build compared to many FFF 3D printers.

Visit http://www.ultibots.com for Kossel 250 V-Slot, Mini Kossel V-Slot, MendelMax & UltiMax Kits, Printed Parts, Delta Components, Filament, Electronics, and More…

Most current STLs are found here https://github.com/UltiBots/K250VS
See more of UltiBots Designs at http://www.thingiverse.com/UltiBots/designs


K250VS Build Guide and more… https://drive.google.com/file/d/0BzrtGXsdA6D8cVNOYmlGbm1oZlU/view?usp=sharing

K250VS BOM is located here https://drive.google.com/folderview?id=0BzrtGXsdA6D8eThHX0ZKT0cwSjg&usp=sharing

License: Creative Commons – Attribution – Share Alike

Tags: delta, KOSSEL, RepRap