My Customized Parametric Music Box

Author: theahb, published on 2013-07-29

Click this button to get the 3D model

Summary

Customized version of http://www.thingiverse.com/thing:53235

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=53235

Instructions

Using the following options:

crankSlack = 0.2
E_PLA = 8240000
MusicCylinderNameFont = write/Letters.dxf
GENERATE_CRANK = 1
$fn = 32
pulleyH = 10
teethNotes = C 0C#0D 0D#0E 0F 0F#0G 0G#0A 0A#0B 0C 1C#1D 1D#1E 1F 1
gearH = 3
ro_PLA = 924
crankDirection = 0
crankTeeth = 8
crankLength = 18
pulleySlack = 0.4
midGearAngle = -5
pinNrY = 35
pinNrX = 13
gear_gap = 1
crankAxisHolderH = 1.55
GENERATE_CASE = 1
GENERATE_CRANK_GEAR = 1
GENERATE_MID_GEAR = 1
crankExtraH = 4
gear_min_gap = 0.1
DEBUG_GEARS = 0
wall = 2
diametral_pitch = 0.6
noteAlpha = 5
snapAxisSlack = 0.35
MusicCylinderNameDepth = 0.6
pteethMinD = 1.5
gear_hold_R = 4
teethHolderH = 5
teethHolderW = 5
pinD = 1.5
pinH = 3
pins = XoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooooooooooooXoooXooXoooooooooooooooooooXoooXooXoooooooooooooooooooXoooXooXoooooooooooooooooooXoooXooXoooooooooooooooooooXoooXooXoooooooooooooooooooXoooXooXoooooooooooooXooXoooXoooooooooooooooooooXooXoooXoooooooooooooooooooXooXoooXoooooooooooooooooooXooXoooXoooooooooooooooooooXooXoooXoooooooooooooooooooXooXoooX
MusicCylinderName = Birmingham
gear_tolerance = 0.1
crankAxisR = 3
pulleySnapL = 1.2
FOR_PRINT = 1
musicAxisHolderH = 3.4
baseFrequC0 = 16.3516
musicCylinderTeeth = 24
midSmallTeeth = 8
midBigTeeth = 20
epsilonCSG = 0.1
crankGearAngle = 15
MusicCylinderNameFontSize = 7
GENERATE_MUSIC_CYLINDER = 1
midAxisHolderH = 3.3
MusicCylinderNamePosition = 0
crankAxisCutAwayH = 4
axisSlack = 0.3
gammaTooth = 1.875
GENERATE_PULLEY = 1

License: Creative Commons – Attribution

Tags: customized