Author: aurelius, published on 2015-02-03
A modular case for the new Raspberry Pi 2 model B or the old Raspberry 1 model b+ (plus).
Base – The Base has a optional breakthrough for the camera Module
Top Logo – This Top Part has a optional breakthrough for the 40 GPIO Pins and has a opened Raspberry Logo
Top mini – This Top Part has optional breakthrough for the 40 GPIO Pins
Camera Module – this is a housing for the Raspberry camera and fits perfectly thru the “base breakthrough”
- I’ve made the bottom and tops stronger
- Added two another logo-tops
— Windows 10
— Windows on Raspberry (wraspi)
The pictures shows a print in black ABS (1.75 mm)
Sliced with Slic3r 1.2.5 2 Perimeter 3 full Top/Bottom Layers 50% rectilinear infill 0.2 mm Layer height Perimeter Speed 60 mm/s
Only the Raspberry Base needs some little bridging abilities (microSD Slot, micro USB Power) or you add some support.
Printed on my custom style Delta with a 0.4 mm Hexagon Hotend.
Tags: camera, case, Model_B, model_b_plus, raspberry, Raspberry_Pi, Raspberry_Pi_2, raspberry_pi_camera