Raspberry Pi Touchscreen Display Stand

Author: TheRaspberryPiGuy, published on 2015-09-08

Click this button to get the 3D model

Summary

Greetings! Got your hands on one of the Raspberry Pi Foundation’s new 7″ touchscreen display modules? Need something to prop it up when you’re using it in on your desk or in your project?

The Raspberry Pi Guy has got you covered! I have designed a slip-in stand for the display – simply print it out on your 3D printer and place the bottom of your display into the slot. The Raspberry-Pi-logo shaped stand will keep your touchscreen display up securely and safely, with plenty of clearance on the back for other add ons and HATs.

See it in action in my release video! https://www.youtube.com/watch?v=k7byf2h_bT8

NOTE: the Raspberry Pi logo is a trademark of the Raspberry Pi Foundation. I would like to thank them for their generosity in letting me use it for this display stand. You can read more about their trademark rules here: https://www.raspberrypi.org/trademark-rules/

Instructions

I printed my display stand in blood red PLA on an Ultimaker 2 with the following settings:

Layer Height: 0.1mm
Shell Thickness: 0.8mm
Print Speed: 50mm/s
Travel Speed: 150mm/s
Infill Density: 18%
Cooling Fans: Enabled

This prints without the need for any supports and on my Ultimaker 2 took around 4/5 hours to do so.

Is your display the wrong orientation for the stand? Try this helpful suggestion from “fredmon3”:

In /boot/config.txt you can add a line that says:

lcd_rotate = 2

Using ‘display_rotate’ won’t also rotate the touches detected on the screen to match so be sure to use “lcd_rotate”.

License: Creative Commons – Attribution – Share Alike

Tags: 3D, display, official, pi, printer, raspberry, Raspberry_Pi, stand, touchscreen, ultimaker