RMRC CCD camera mount

Author: MiguelAlvarez, published on 2013-08-14

Click this button to get the 3D model


I’m not sure if all ReadymadeRC ccd cameras are the same dimensions. This holder was made using the dimensions of


Its a tight fit and can be plcaed on the original hinge using earplugs or another dampener (I chose moongel).

You’ll need a 16mm M3 screw and an M3 nut.
I also used a rubber band to hold the camera case against the hinge.
Also I had to cut out a section of the original hinge to leave space for the camera cable to connect

License: Creative Commons – Attribution

Tags: 600, camera, CCD, fpv, NTSC, quadcopter, RC, readymade, ReadymadeRC