three nail propellor balancer.

Author: eddiema, published on 2013-11-10

Click this button to get the 3D model


I did my prop a mischief yesterday and I’m repairing it today.
After the puttying and sanding I will need to balance it so I made a balancer.
The rails on the balancer along with the prop spindle are 100mm nails.
This design is for my 1400mm prop.
This is a full sized prop it is not a model.
I’m supplying the stetchup file so it can be enlarged if needed.


I printing in PLA at 400 micron.
Holes are tight so I heated he nails to get them in.

License: Creative Commons – Attribution – Share Alike

Tags: balancer, prop, propellor, prop_balancer